$A$ $20\,cm$ long metallic rod is rotated with $210\,rpm$ about an axis normal to the rod passing through its one end. The other end of the rod is in contact with a circular metallic ring. $A$ constant and uniform magnetic field of $0.2\,T$ parallel to the axis exists everywhere. The emf developed between the centre and the ring is $.......\,mV$. Take $\pi=\frac{22}{7}$.

Prove that the mechanical power required to move a rod in a uniform magnetic field is converted into electrical power.

In an $AC$ generator, if a coil of $N$ turns and area $A$ is rotated at $v$ revolutions per second in a uniform magnetic field $B$, then the motional $EMF$ produced is equal to (At $t=0$ $s$, the coil is perpendicular to the field).

$A$ conducting wire $XY$ of mass $m$ and negligible resistance slides smoothly on two parallel conducting wires as shown in the figure. The closed circuit has a resistance $R$ due to $AC$. $AB$ and $CD$ are perfect conductors. There is a magnetic field $\vec{B} = B(t) \hat{k}$.
$(i)$ Write down the equation for the acceleration of the wire $XY$.
$(ii)$ If $\vec{B}$ is independent of time,obtain $v(t)$,assuming $v(0) = u_0$.
$(iii)$ For $(ii)$,show that the decrease in kinetic energy of $XY$ equals the heat lost in $R$.

$A$ conducting bar of mass $m$ and length $l$ moves on two frictionless parallel rails in the presence of a constant uniform magnetic field of magnitude $B$ directed into the page as shown in the figure. The bar is given an initial velocity $v_{0}$ towards the right at $t=0$. Then,the:

$A$ uniform magnetic field of $0.4 \ \text{T}$ acts perpendicular to a circular copper disc $20 \ \text{cm}$ in radius. The disc is rotating with a uniform angular velocity of $10 \pi \ \text{rad s}^{-1}$ about an axis passing through its centre and perpendicular to the disc. What is the potential difference developed between the axis of the disc and the rim (in $\text{V}$)? $(\pi = 3.14)$