$A$ $50\,\Omega$ resistance is connected to a battery of $5\,V$. $A$ galvanometer of resistance $100\,\Omega$ is to be used as an ammeter to measure current through the resistance. For this,a resistance $r_s$ is connected to the galvanometer. Which of the following connections should be employed if the measured current is within $1\%$ of the current without the ammeter in the circuit?

If the number of turns in the coil of a galvanometer is decreased,then the resistance of the galvanometer:

To convert a galvanometer into an ammeter,we connect . . . . . . .

$A$ moving coil galvanometer has $50$ turns and each turn has an area $2 \times 10^{-4} \ m^2$. The magnetic field produced by the magnet inside the galvanometer is $0.02 \ T$. The torsional constant of the suspension wire is $10^{-4} \ N \ m \ rad^{-1}$. When a current flows through the galvanometer,a full-scale deflection occurs if the coil rotates by $0.2 \ rad$. The resistance of the coil of the galvanometer is $50 \ \Omega$. This galvanometer is to be converted into an ammeter capable of measuring current in the range $0-1.0 \ A$. For this purpose,a shunt resistance is to be added in parallel to the galvanometer. The value of this shunt resistance,in ohms,is:

The sensitivity of a moving coil galvanometer is $s$. If a shunt of $\frac{1}{8}$ of the resistance of the galvanometer is connected to the moving coil galvanometer,what will its new sensitivity be?

$A$ galvanometer having $30$ divisions has a current sensitivity of $0.0625 \frac{\text{div}}{\mu A}$. If it is converted into a voltmeter to read a maximum of $6 \text{ V}$,then the resistance of that voltmeter is: