Consider the four circuits shown below. In wh | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The power dissipated in a circuit is given by $P = \frac{E^2}{R_{eq}}$,where $E$ is the $EMF$ of the source and $R_{eq}$ is the equivalent resista

Vedclass · Accepted Answer

Vedclass · Answer

(A) The power dissipated in a circuit is given by $P = \frac{E^2}{R_{eq}}$,where $E$ is the $EMF$ of the source and $R_{eq}$ is the equivalent resistance of the circuit. To maximize power $P$,we need to minimize the equivalent resistance $R_{eq}$.For circuit $A$: Two resistors $R$ are in parallel. $R_{eq,A} = \frac{R \cdot R}{R + R} = \frac{R}{2} = 0.5R$.For circuit $B$: Two resistors $R$ are in series. $R_{eq,B} = R + R = 2R$.For circuit $C$: Two resistors $R$ are in parallel,and this combination is in series with another resistor $R$. $R_{eq,C} = \frac{R}{2} + R = 1.5R$.For circuit $D$: Two resistors $R$ are in series,and this combination is in parallel with another resistor $R$. $R_{eq,D} = \frac{(2R) \cdot R}{2R + R} = \frac{2R^2}{3R} = \frac{2}{3}R \approx 0.67R$.Comparing the equivalent resistances: $R_{eq,A} (0.5R) Since circuit $A$ has the minimum equivalent resistance,it will dissipate the maximum power.

Consider the four circuits shown below. In which circuit is the power dissipated the maximum? (Neglect the internal resistance of the applied power source $E$)

Similar Questions

Two cables of copper are of equal lengths. One of them has a single wire of area of cross-section $A$, while the other has $10$ wires of cross-sectional area $A / 10$ each. Determine their suitability for transporting $A.C.$ and $D.C.$

Two wires with resistances $R$ and $2R$ are connected in parallel. The ratio of heat generated in $2R$ and $R$ is:

Two electric bulbs marked $25\ W - 220\ V$ and $100\ W - 220\ V$ are connected in series to a $440\ V$ supply. Which of the bulbs will fuse?

When a $CuSO_4$ cell and an $AgNO_3$ cell are connected in series and a current is passed through them,if $1 \, mg$ of copper is deposited in the first cell,how much silver (in $mg$) will be deposited in the second cell? $(A_{Cu} = 63.57, A_{Ag} = 107.88)$

The thermo emf of a thermocouple is given by $E = aT + bT^2$,where $\frac{a}{b} = -200^{\circ}C$. If the cold junction is kept at $30^{\circ}C$,then the inversion temperature is ($\varepsilon$ in volt,$T$ in centigrade). (in $K$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module