In an $Ingen-Hauz$ experiment,the wax melts on two rods up to lengths of $10 \ cm$ and $25 \ cm$ respectively. If the two rods are made of different materials,what is the ratio of their thermal conductivities?

The ends $Q$ and $R$ of two thin wires,$PQ$ and $RS$,are soldered (joined) together. Initially,each of the wires has a length of $1 \,m$ at $10^{\circ} C$. Now,the end $P$ is maintained at $10^{\circ} C$,while the end $S$ is heated and maintained at $400^{\circ} C$. The system is thermally insulated from its surroundings. If the thermal conductivity of wire $PQ$ is twice that of the wire $RS$ and the coefficient of linear thermal expansion of $PQ$ is $1.2 \times 10^{-5} \,K^{-1}$,the change in length of the wire $PQ$ is (in $\,mm$)

$A$ metal rod of length $10 \text{ cm}$ and area of cross-section $2.8 \times 10^{-4} \text{ m}^2$ is covered with a non-conducting substance. One end of it is maintained at $80^{\circ} \text{C}$,while the other end is put in ice at $0^{\circ} \text{C}$. It is found that $20 \text{ g}$ of ice melts in $5 \text{ min}$. The thermal conductivity of the metal in $\text{J s}^{-1} \text{ m}^{-1} \text{ K}^{-1}$ is (Latent heat of ice is $80 \text{ cal g}^{-1}$.)

The thermal conductivity of a material in $CGS$ system is $0.4$. In steady state,the rate of flow of heat is $10 \ cal/sec-cm^2$. Then the thermal gradient will be ....... $^oC/cm$.

Five rods of same dimensions are arranged as shown in the figure. They have thermal conductivities $K_1, K_2, K_3, K_4$ and $K_5$. When points $A$ and $B$ are maintained at different temperatures,no heat flows through the central rod if

Three rods made of the same material and having the same cross-sectional area but different lengths $10\, cm, 20\, cm$,and $30\, cm$ are joined as shown. The temperature of the junction is ......... $^oC$.