A metal rod of length 10 text{ cm} and a rect | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The resistance $R$ of a conductor is given by the formula $R = \rho \frac{L}{A}$,where $\rho$ is the resistivity,$L$ is the length of the conducto

Vedclass · Accepted Answer

maximum when the battery is connected across $1 	ext{ cm} 	imes 0.5 	ext{ cm}$ faces

Vedclass · Answer

(A) The resistance $R$ of a conductor is given by the formula $R = ho \frac{L}{A}$,where $ho$ is the resistivity,$L$ is the length of the conductor in the direction of current flow,and $A$ is the cross-sectional area perpendicular to the current flow.From the relation $R \propto \frac{L}{A}$,we see that for a fixed volume of the material,the resistance is proportional to the square of the length $(L^2)$ or inversely proportional to the square of the area $(A^2)$.Alternatively,for a fixed rod,the resistance is maximum when the current flows through the smallest cross-sectional area $A$,which results in the longest effective length $L$.The three possible cross-sectional areas are:$1$. $A_1 = 10 	ext{ cm} 	imes 1 	ext{ cm} = 10 	ext{ cm}^2$$2$. $A_2 = 10 	ext{ cm} 	imes 0.5 	ext{ cm} = 5 	ext{ cm}^2$$3$. $A_3 = 1 	ext{ cm} 	imes 0.5 	ext{ cm} = 0.5 	ext{ cm}^2$The resistance is maximum when the cross-sectional area $A$ is minimum. The minimum area is $0.5 	ext{ cm}^2$,which corresponds to the faces of dimensions $1 	ext{ cm} 	imes 0.5 	ext{ cm}$.

$A$ metal rod of length $10 \text{ cm}$ and a rectangular cross-section of $1 \text{ cm} \times 0.5 \text{ cm}$ is connected to a battery across opposite faces. The resistance will be

Similar Questions

Two wires $A$ and $B$ of the same material and same mass have radii $2r$ and $r$,respectively. If the resistance of wire $A$ is $34\,\Omega$,then the resistance of wire $B$ will be ............ $\Omega$.

When a piece of aluminium wire of finite length is drawn through a series of dies to reduce its diameter to half its original value,its resistance will become ........ times.

If the length of a wire is doubled, its specific resistance (resistivity) will be.......

$A$ tapered bar of length $L$ and end diameters $D_1$ and $D_2$ is made of a material of electrical resistivity $\rho$. The electrical resistance of the bar is

If the masses of three wires of same material are in the ratio of $1: 2: 3$ and their lengths are in the ratio of $3: 2: 1$,then electrical resistances of these wires are in the ratio

Vedclass Test Series

Exam Paper Generator

Online Exam Module